Stump Grinding Cost
What does stump grinding cost in Brevard County?
Per-inch pricing explained, minimum charges, large-stump ranges, and what actually moves the number. Free referral to one vetted local pro.
Get your free quote match
Tell us about your tree. We'll connect you with one vetted local Brevard County tree professional.
How much does stump grinding cost in Brevard County?
Most stumps run $100–$400. Pricing is usually by the inch — about $2–$5 per inch of diameter measured across the widest part of the stump — with a minimum charge of $100–$150 to cover travel and setup. Large stumps 36 inches and over typically run $300–$600. These are typical ranges, not verified Brevard prices.
| Service | Typical range |
|---|---|
| Stump grinding | $100 – $400 per stump |
| Per-inch pricing | $2 – $5 per inch of diameter |
| Minimum charge | $100 – $150 |
| Large stumps (36 inches and over) | $300 – $600 |
All figures are typical ranges, not verified Brevard prices. The exact quote depends on size, access, and site conditions.
Typical ranges, checked November 2026. The exact quote depends on size, species, access, and condition.
How does per-inch pricing actually work?
The pro measures the stump across its widest point, multiplies by a per-inch rate, and applies a minimum charge if the result is small. A 20-inch stump at $3 per inch is about $60 of grinding, but the $100–$150 minimum means you pay the minimum. A 40-inch oak stump at $4 per inch is $160 before haul-away and access factors. That's why most quotes land between $100 and $400.
What makes a stump cost more?
Size is the big one, but access matters almost as much. A stump a standard grinder can roll up to through a 36-inch gate costs less than one in a tight fenced backyard needing a hand-carried grinder. Hardwood stumps cost more than softwood, palm stumps are fibrous and tougher to grind, and a deep grind below the standard 6–12 inches adds to the price. Haul-away of the chips and clean topsoil fill is usually extra.
See the stump grinding service page for grinding depth and what happens to the chips.
Is it cheaper to grind multiple stumps at once?
Yes. The minimum charge is the fixed cost of bringing the grinder out, so multiple stumps on one visit share that trip charge and drop the per-stump price. If you have several stumps, ask the pro to quote them together rather than one at a time.
Do I need utilities marked before stump grinding?
Yes — always have underground utilities marked before any digging or stump work. Stumps often sit near buried lines, irrigation, or a septic field, and a grinder can sever a shallow line. It's free and it prevents an expensive hit. The pro will confirm this is done before grinding.