Brevard Tree Guide is a free local referral service. We don't cut trees ourselves — we connect Brevard County homeowners with one vetted local tree professional. You never pay us; our pro pays us a referral fee.

BREVARD COUNTY, FLORIDA

Tree service glossary — plain-English tree terms

The words that show up on a quote, a permit, or a risk report — defined in plain English so you know exactly what you are paying for and what the rules mean.

Get your free quote match

Tell us about your tree. We'll connect you with one vetted local Brevard County tree professional.

A photo helps us match you faster — a wide shot of the whole tree or stump is best.

Free, no obligation. You never pay us — our vetted pro pays us a referral fee.

What these terms mean on the Space Coast

Each term links to the page where it matters most in practice. Use this as a reference when you read a quote, a permit, or a risk report.

What is DBH?

DBH is diameter at breast height — the trunk's diameter measured at about 4.5 feet off the ground. It is the standard way arborists and regulators measure a tree, and it is the number that decides whether a tree is protected under Brevard County Code. A hardwood at 10 inches DBH or a softwood at 14 inches DBH is protected on the mainland; a specimen tree is 24 inches DBH or more; on the barrier island the threshold drops to 1.5 inches DBH.

See the master permit page for how DBH sets the thresholds.

What is a specimen tree?

A specimen tree is a tree of notable size — in Brevard County, 24 inches DBH or more. Specimen trees carry the strongest protection: they cannot be cleared under a land-clearing permit, and removing one without a permit can mean restoration and double fees in some cities. The term matters when you are planning removal or clearing.

What is a canopy?

The canopy is the upper layer of a tree's branches and leaves — the 'roof' of the tree. Canopy thinning opens it up so wind moves through instead of pushing against a solid sail, which is the proper way to storm-prep a tree. The county's land-clearing rules limit how much canopy you can remove on a lot.

What is the understory?

The understory is the layer of smaller trees, shrubs, and brush beneath the main canopy. In Brevard's land-clearing rules, clearing is limited to up to 50% of the understory (or one acre) — you cannot strip the understory bare. Forestry mulching is a way to manage the understory without a full clear.

See the forestry mulching page.

What is ANSI A300?

ANSI A300 is the national standard for tree care operations — pruning, trimming, and management. It defines what proper, professional pruning is and what it is not. A pro who works to ANSI A300 will not top your trees; a pro who offers to top them is not following the standard. It is the benchmark a real tree-care professional measures against.

What is an ISA Certified Arborist?

ISA — the International Society of Arboriculture — certifies arborists by exam, experience, and continuing education. An ISA Certified Arborist is the credential that matters in Florida tree work, because Florida does not license tree companies. Under Florida Statute 163.045, an ISA Certified Arborist is one of the two professionals who can document a tree as an unacceptable risk to remove the permit requirement. You can verify a credential through the ISA's public credential lookup.

What is hat-racking?

Hat-racking is the palm version of topping — cutting all the fronds off the top of a palm so it looks like a hat rack. It is also called a 'hurricane cut.' Hat-racking weakens the palm, stunts it, and makes it more likely to fail in wind — the opposite of what you want before a storm. Proper palm care removes only dead fronds and seed pods.

What is topping?

Topping is cutting the top off a tree — chopping the main leaders back to stubs. It starves the tree, causes decay, and grows back weak, dense regrowth that is more likely to fail in a storm. ANSI A300 standards reject it, and any pro who offers to top your trees is not following professional standards. Reduction pruning is the proper alternative.

See the topping page.

What is reduction pruning?

Reduction pruning is the proper way to reduce a tree's size or reach — making selective cuts back to a lateral branch that can take over as the new leader, instead of chopping the top off. It preserves the tree's structure and health while reducing its height or spread. It is the ANSI A300 alternative to topping.

What is a grapple truck?

A grapple truck has a hydraulic claw arm that picks up large piles of brush and logs in one pass. It is the efficient way to haul a big storm pile — typically $200 to $600 per load. After storms, hired contractors must haul their own debris; a grapple truck is how a pro does it.

See the debris hauling page.

What is forestry mulching?

Forestry mulching uses a machine that grinds understory, brush, and invasives into mulch you leave on the ground — instead of clearing everything to bare dirt. It controls erosion, leaves the soil intact, and is often the right call when you want to open up a lot without a full clear. Typical ranges are $1,000 to $3,000 per acre.

See the forestry mulching page.

Stump grinding vs stump removal — what is the difference?

Stump grinding shreds the stump below grade into chips you can bury or haul — faster, cheaper, and enough for most homeowners, typically $100 to $400 per stump. Full stump removal digs the whole stump and root ball out, leaving a big hole and disturbed soil — typically $300 to $700 per stump — and is rarely needed unless you are building on the spot.

What is the riparian fringe?

The riparian fringe is the band of mangroves along the shoreline — up to 50 feet waterward — that Florida law regulates under Statutes 403.9321–403.9333. Trimming in the fringe is what the owner and PMT exemptions address; the 65% rule says at least 65% of the fringe must stay untrimmed in height where the shoreline exceeds 150 feet.

What is a PMT?

A PMT is a professional mangrove trimmer — a designation under Florida law that covers trimming mangroves up to 24 feet in height, beyond what an owner can do without a permit. The PMT must still follow the statutory limits and the 6-foot floor. Mangrove removal is never covered by the PMT exemption; that needs an individual permit.

What is section 163.045?

Florida Statute 163.045 says a local government cannot require a permit or fee to prune or remove a tree on single-family detached residential property if the owner has documentation — a signed onsite assessment under ISA tree risk assessment best practices by an ISA Certified Arborist or a Florida-licensed landscape architect — stating the tree presents an unacceptable risk. It does not apply to mangroves, and HOA rules can still apply.

Frequently asked questions